Leave a Message
We will call you back soon!
Your message must be between 20-3,000 characters!
Please check your E-mail!
More information facilitates better communication.
Submitted successfully!
We will call you back soon!
Leave a Message
We will call you back soon!
Your message must be between 20-3,000 characters!
Please check your E-mail!
—— Mr Gus Klopper - From Morocco
—— Mr Pedro - from Italy
—— Mr Ronaldo - From Poland
—— Mr Peter from Germany
QC Profile
Japan Mitsubishi Toner powder Technical Analysis:
Printing parameters | ||
Image density (Blackness) | Above 1.45 | |
Background | Less than 0.015 | |
Gradation | Above 4 | |
Resolution L/mm | vertical(L/mm) | Above 4 |
Horizontal(L/mm) | Above 4 | |
Fuser Firmness | Above 90% | |
Uniformity of the blackboard | Less than 0.1 | |
Flare | Less than 2 | |
Ghosting | No | |
Streak | No | |
Toner Usage mg/page | Less than 60 | |
Waste Ratio mg/page | Less than 15 | |
Compatibility with OEM powder | Natural cross fully compatible | |
Physical and chemical parameters | ||
Appearance | Black no impurities | |
Smell | Black no impurities | |
Agglomeration temperature(℃) | Above Slight |
Test paper for Black toner cartridges:
Test paper for color toner cartridges:
Original data chip with various version for your selection:
QC/Technical Support
1). Mechanical test to ensure the toners smooth operation and no noise, and to meet with ISO standards.
2). Environment protection test to ensure toners' environmental safe.
3). Duration test to ensure toners can last more than one year.
4). Difficult conditions tests such as abnormal temperature, air pressure, strong sun light and rough transportations tests to ensure the printing quality remains high.
5). Water resistant test to ensure printing won't fade and be diluted when wet.
6). Printing quality test to ensure the printing is real black, no slur and won't fade.
7). Capacity test to ensure the print volume is the same as the ones of original manufacturers.
8.Stringent leaking testings are conducted on one by one in vacuum leaking testing machines to ensure no leaking during for shipment
9). 100% test before ex-factory, 100% guaranteed, 1:1 replacement for defective goods
PS.
Average failure rate:
monochrome toner cartridge -- less than 1%
color toner cartridge -- ranging from 1% to 3% for different items
Factory Address:Room 203,Building B,Fengshen Industrial area, Fenggang Town, Dongguan City, Guangdong province, China. | |
Sales office:Esta floor,Building E, No.22, Jianan Road, Baoan district, Shenzhen, Guangdong province, China | |
+00-86-159-86723295 | |
george@estaofficetech.com | |