Toner Kyocera TK 410 Black Kyocera Taskalfa Toner 15000 pages

Description:

• Suitable for KM 1620/2020 serial copiers
• Toner powder: 870g
• Page yield: 15,000P
• Color: black
• Condition: brand new, high quality toner powder
• Self-molding, high-quality with excellent printing result
• 100% test before ex-factory, 100% guaranteed and 1:1 replacement for defective goods
• We can also offer the Kyocera like: TK17, TK18, TK100, TK110, TK50(H), TK55, TK60, TK65/TK70, TK410, TK420, TK3031, TK120, TK122, TK310, TK320, TK330, TK312, TK322, TK332, TK715 and TK1525 with their toner chip and toner powder are all available for offering
• Packing: neutral box or original packing

Specifications:

Comment made by Mr Soeniel Ramjanam From Suriname:

TK410 and TK439 is compatible, same Kyocera Taskalfa toner.

Nice gears, and correct universal Pin

Strictly Quality Control:

  *** Incoming Material Quality Control 

           Brand new cartridge using high quality raw material for the cartridge and the other parts.

           High quality of Mitshubishi,katun, chinese toner powder with good printing performance,sharp text printing   and less waste toner,

           Each component requires strict testing to ensure the perfect matching.

     ***   Production online Quality Control

            Insure each of our product is 100% tested before down of the production line

     ***.   Final Quality Control

     ***.  Outgoing Quality Control 

        All products are pre-tested before leaving factory

Compatible toner cartirdge for Kyocera series

Precautions:

1) To avoid use and storage in the high humidity high temperature cold environment. Do not tear the 

seals before

 use the toner cartridge , otherwise the toner will soon in wet condition and  become agglomeration, 

these will

 affect the print quality and sometimes will cause the print color shallow. If the cartridge stores in too hot or too cold place too long, we must return to room temperature for a short time before use.

2) Do avoid exposure the toner cartridge to bright light for a long time. Do not tear the plastic bags when the

 toner cartridges are not using, especially do not open the drum on the drum light barrier. If let continuous

exposure into the bright light for more than ten minutes, the drum will be scrapped.

3) When replacing the toner cartridge, it is the best if you use the vacuum cleaner to clean the place where the toner cartridge is put, use a soft cloth to clean the accumulation of paper dust and toner, 

the exposed electricalcontact pads is available to use cotton swab dipped in alcohol to wipe, to maintain 

goodelectrical contact.

4) Do not attempt to turn the OPC drum core by hand, OPC drum core must pay attention to the 

direction of rotation, if rotating in the wrong direction, parts can be damaged, and it will causing the print 

or print smudges powder leakage.

5)  When select the paper, do not use print paper if it wrinkles, uneven cut or too thick, tough, rough paper, etc. it may affect the print quality and abrasion drum.

6) The new toner cartridge should be shaken 6-8 times by horizontally, loosen the toner and make them

distribution. And then pull out the sealing strip, otherwise, the toner may be unevenly.

7)  Ensure cartridge away from the monitor, hard drive, or any other magnetic material.